Clean the edge
The included wipe removes wax and moisture. It's the step everyone skips, and it's the only one that decides whether it holds.
🎃 −10% code FROST10
🎃 −10% code FROST10
Waterproof snow & water
Cold white
installs in 5 min
free shipping
Ski & snowboard LED kit
Light up your runs
Two waterproof LED strips that stick onto the edges of your skis or board. Installs in five minutes, no drilling.
- Two one-meter strips, one per ski
- Go on the edges, the top stays untouched
- Glove-friendly remote
- Two strips that trace the entire outline of the board
- Flexible: they take the camber and the knocks
- Clip-on waterproof box, nothing dangling
Bundle price already discounted. Free shipping from the very first kit.
Free worldwide shipping, ships within 1–2 business days
30 days to change your mind, full refund
1-year warranty on the strips and electronics
Free shippingAnywhere in the world, no minimum
30 days to change your mindEasy returns, full refund
1-year warrantyStrips, control boxes and electronics
Support by emailA real answer within 24 h
Same slope, same night
Slide. See the difference.
On the left, the strip installed but off. On the right, one press on the remote. That's the whole point of the product, and you see it in a second.
Off
On
Installation
Five minutes at the kitchen table
No screws, no drilling, no permanent marks on your gear. Everything you need is in the box.
Apply the adhesion promoter
One pass along the full length, then let it dry while you unpack the rest. The adhesive then grips like it's on glass.
Peel and press
Start at the tail and unroll toward the tip, pressing as you go. The strip follows the curve effortlessly.
Clip on the box, press
The waterproof control box clips on near the binding. One press on the remote, gloves on, and you're lit.
The fan favorite
White, the one everyone keeps
On snow, white carries the farthest and stays readable at full speed. It's the only color we keep: a crisp light, the same on skis and on the board, by day or as night falls.
Cold white, with steady and flashing modes on the control box.
What's in the kit
It's all inside
Nothing to buy at the store, nothing to order separately. Open it, stick it on, ride.
- 2 LED stripsRolled up, ready to unroll
- 2 waterproof control boxesControls the light modes
- Prep wipeTo degrease the edge before installing
- Adhesion promoterThe little bottle that makes the adhesive stick
- 9V batteries includedThe kit works straight out of the box
Risk-free
Try it, or get your money back
30 days to change your mind
Not happy with the kit? Just write to us and we'll refund you. No endless forms.
Free tracked shipping
Tracking number sent as soon as the label is created. We'd rather give you the real delivery time.
1-year warranty
Strips, control boxes and electronics covered against manufacturing defects for twelve months.
Your questions
What people ask us most
Yes, as long as you do the first two steps. The wipe degreases the edge, the adhesion promoter preps the surface, and the adhesive reaches full strength within a few hours. Install it the night before and you're good to go the next day.
The strip comes off by pulling gently along its length, at room temperature. Some adhesive residue may remain: it wipes off with a cloth. Nothing is drilled, nothing is screwed.
The strips and control boxes are waterproof. The strip is flexible: it follows the ski's camber and absorbs impacts instead of breaking.
Your order ships within one to two business days. You'll get the tracking number by email as soon as the label is created. Free shipping, anywhere in the world.
Before everyone else
−10% off your first order
Your code arrives by email right away. After that, a message when a new color or format drops. Nothing else.